AutoCAD: NEW to AutoCAD 2016 Dimension Button

Written by: Cindra Drowne-Walsh

This new button (Dimension) allows continuous placement of dimensions. With selection of Geometry or Object Snap it switches from Liner to Radial to Angular and so on for quicker placement of Dimensions.

Dim1

*Dimension Styles are pre-defined as in previous versions.

            *Layers – There is an option within the Annotate – Dimension Panel for Dim Layer

Override. This allows you to select the Companies Standard Layer for the Dimensions to reside on. If you leave it at on Use Current it will place the Dimensions onto the Current Layer – and the current layer would be set in the Home tab – Layer Panel as in previous releases.

Dim2

Hover over Geometry for a preview of the dimension.

 

 

 

Dim4

 

Right-Click options once the user has pick a point on the drawing:

Dim6 LinearDim5 rt Radial

Right-Click option right after activating the Dim command and not yet selected a point on the drawing.

Dim7 Linear

The Video shows the Dim command in use. You will see it keeps the command active (running) until the user stops it – What type of dimension will be placed per the geometry selected (Linear, Angular, Aligned, Radius and Diameter), The Pop-up window when you Right Click while dimensioning a circle to switch the Option from Diameter to Radius.

*No Worries until you are comfortable with this new Button the Dimension drop down is still available and works the same as in previous release.

Dim3

Learn more about AutoCAD 2016 Dimension Button by registering for the 32-hour Fundamentals class. Click Here to request more information.

AutoCAD: Divide or Measure

Written by Cindra Drowne-Walsh

Divide: Located in the Home Tab / Draw panel drop down / Measure button

Places a Point Style symbol or (Block) at EQUAL Segments along the selected geometry.

Measure: Located in the Home Tab / Draw panel drop down / Measure button

Places a Point Style symbol or (Block) at MEASURED Intervals (a specified distance) along the selected geometry.

DV1

These two Commands are a great feature to use on all geometry such as Lines, Circles, Polygons and Splines to name a few. This does not break the selected geometry up. It places a Point Style or BLOCK on the geometry so that you have an exact location to reference. When referencing a Point Style with the Object Snap features turn on NODE. This snaps to the Point Style.

Point Style: Located in the Home tab / Utilities panel drop down / Point Style button. By default the Point Style is set to be a dot or a point.  This is changed by either the Point Style Button or by typing in DDPTYPE and setting it through the Command Line. *Keep in mind they may also be set as a blank option so nothing will display. If the Point Styles were not placed on their own layer to freeze prior to printing this is a quick way to hide them so they don’t display.

*Point Styles do print. Only ONE style is visible in a Drawing. They update visually when a new style is selected.

DV2DV3
Command Line input/prompts for both commands and the results.

Command: _DIVIDE
Select object to divide: “select the line”
Enter the number of segments or [Block]: 6 ↵
This placed the Point Style onto the line segment five (5) times to give the line six (6) equally spaced segments. These Point Styles selectable by the Object Snap NODE

Command: _MEASURE
Select object to measure: “select the line”
Specify length of segment or [Block]: .7625 ↵

DV4

Command Line input/prompts for both commands using the BLOCK option and the results.

Command: DIVIDE

Select object to divide: “Select the POLYLINE”

Enter the number of segments or [Block]: B

Enter name of block to insert: TEST “this is the name of the BLOCK that resides in the drawing”

Align block with object? [Yes/No] <Y>: Y

Enter the number of segments: 4

Command: MEASURE

Select object to measure: “Select the POLYLINE”

Specify length of segment or [Block]: B

Enter name of block to insert: TEST “this is the name of the BLOCK that resides in the drawing”

Align block with object? [Yes/No] <Y>: Y

Specify length of segment: 1.5

DV5

**When utilizing a Block instead of the Point Style the Block must already reside in the drawing. For example when you access the Insert Command it is listed within the available Blocks. If the Block is located out on the network insert it into the drawing prior to using it with these commands.

NODE: is the Object Snap to use when snapping to a Point Style.

DV6

Learn more about Divide Measure by registering for the 32-hour Fundamentals class. Click Here to request more information.

AutoCAD: Placing your Dimensions and Text on the right angles for Isometric drawings

Written by: Cindra Drowne-Walsh

Setting up the TEXT STYLES:

There are two setting that need to be done to achieve the correct angles off the text.

  1. TWO TEXT STYLE must be created one with the OBLIQUE ANGLE set to 30 and the other style with the OBLIQUE ANGLE set to -30 (negative 30).
  1. When in the MTEXT Command After the FIRST PICK on the Screen the ROTATION needs to be defined to either 30, -30 (negative 30) or 90. *Unfortunately this step needs to be done every time the MTEXT is accessed as the Rotation option seems not to stay as most other options do.

Set the Oblique Angle in the Text Style Dialog Box.

Iso 1

Set the Rotation within the MTEXT Command.

Iso 2
**The OBLIQUED TEXT STYLE needs to be defined first as this Text Style will be used as the Dimension Text Style.

Iso 3
Iso 4
Setting up the DIMENSION STYLES:
1. Create a NEW DIMENSION STYLE and associate an Isometric Text Styles in the Text Tab of the Dimension Style Manager. Multiple Dimension Styles are needed only because the Isometric Text Styles previous created will need to be associated to those different Dimension Styles. Name these styles accordingly so it will be easy to select the desired style later.
Iso 5

2. When Placing the Isometric Dimensions

a. Select the appropriate Dimension Style – place the dimension into the drawing.
b. Select the Oblique Icon (located in the Annotate Tab / Dimension Panel drop down.) Select the Dimension / Enter / type in the needed Angle. 30, 90, 150, 330.

Iso 6

Iso 7

Three Isometric options (Left, Top, Right) to switch the cross hairs to a different plane CTRL + E, F5 or even simpler select the  down arrow at the Isodraft Icon in the Status Bar.

Iso 8
Learn more about Placing your Dimensions and Text on the right angles for Isometric drawings by registering for the 32-hour Fundamentals class. Click Here to request more information.

AutoCAD: WBlocks (Write Blocks) adjust to the Insert Unit

Written by Cindra Drowne-Walsh

Do you use different forms of units within your projects/company and want to utilize your WBlocks in all projects quickly?

Example. A projects is Decimal Units and another projects in Metric Units, you have WBlocks created in Decimal Units and want to utilize then in a Metric unit DWG.

Steps to take for the conversion to work seamlessly.

  1. When creating a WBlock make sure a form of units that applies to the WBlock is defined in the WBlock dialog box / Insert Units drop down area.

*In this drawing example the WBlock Insert Units are set to Inches:

WBlock Units 1

Wblock Units 2

*Here is the WBlock example, Switch Plate drawn in Decimal units, the Insert units defined as Inches in the Write Block dialog box.

WBlock Imperial units 3

2. Open the next Drawing define the Insertion Scale found in the Drawing units Dialog box. Ex. Millimeters…
Drawing Units Millimeters 4
3. Insert the WBlock: The conversion happens automatically.

WBlock Metric units 5

Imperial Units:   X   the metric conversion of Millimeters (24.5)

2.750    X       25.4   =       70.6120

 

4.500    X       25.4   =       114.3000

 

 

 

 

 

 

The suffix mm was added – within the Dimension Style manager / Primary Units tab / Linear Dimension area.

Hint:   When creating a WBlock for your library stay consistent with the form of units you create them in. If you and your co-workers know all WBlocks are created in Inches they will know to check the Insertion Scale if inserting into a drawing with units other than Inches.  Inches is the example option I chose to use your type of work will direct that choice.

Learn more about WBlocks (Write Blocks) adjust to the Insert Unit features by registering for the 32-hour Fundamentals class. Click Here to request more information.

AutoCAD: Share your Tool Palettes

Written by Cindra Drowne-Walsh

Export and Import

A Tool Palette may be created by an individual to help them work more efficiently and or a company may create Tool Palettes to help keep everyone consistent with company and or client specifications.

Once a Tool Palette is defined the Export option can be used to save it for easy recall. Save this file on the network and all AutoCAD stations can then Import it easily into their system.

A Tool Palette has the extension of .XTP. A Tool Palette Group has the extension XPG.

Steps to EXPORT A Tool Palette:

  1. Manage Tab – Customization – Tool Palettes Icon: (Image 1)

Can also be accessed right from the Tool Palette – Select the Properties symbol in the Title area of the Tool Palette, (Image 2)

From that pop up window select Customized Palettes… (Image 3)

  1. This opens the Customize Dialog Box. (Image 4)
  2. In the Palettes section – Right Click over the Tool Palette Tab you want to Export: (Image 4)
  3. Select Export: *Make sure this file is saved on the Network so Everyone has access to the same Tool Palette (Location is important especially if it is modified this will allow for a quick means of updating all systems)
Image 1

Image 1

Image 2

Image 2

 

Image 3

Image 3

Image 4

Image 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*The same process is used for Exporting Palette Groups as Exporting Palettes with the exception you

Right–Click in the Palettes Groups section (just right of the Palettes area). Select Export.

Steps to Import a Tool Palette or Tool Palette Group.

  1. Manage Tab – Customization – Tool Palettes Icon:
  2. This opens the Customize Dialog Box.
  3. Right – Click in the Palettes section and select Import:
  4. This opens the Import Palette Dialog Box – Path yourself out to the location where the Tool Palette or Tool Palette Group was saved.
  5. Select the file – Open – Close. The Tool Palette Panel should appear in the Tool Palette.

Some key points to keep in mind when working with Tool Palettes.

The following information is directly from AutoDesk AutoCAD 2015 Help center:

About Sharing Tool Palettes and Tool Palette Groups

Export Tool Palettes and Tool Palette Groups:

When you export a tool palette or tool palette group, keep these points in mind:

  1. When you export a customized tool palette, an image folder with the same name is may be created in the same location as the XTP file. This folder contains the images for user-created content tools and command tools with user-defined images
  2. Avoid copying tool palette (ATC) files between different product releases. Doing so can cause potential problems when migrating to a future release.
  3. Import Tool Palettes and Tool Palette Groups

When you import a tool palette or tool palette group, keep these points in mind:

  1. When you import a customized tool palette, the image folder must be in the same location as the imported XTP file in order for the icons to appear in the tool palette.
  2. Tool palettes can be used only in the product release in which they were created. However, you can migrate tool palettes from previous releases to the current release using the Migrate Custom Settings dialog box.

**If you share tool palettes with someone who is not using the same AutoCAD-based product or release in which they were created, the tools might not work properly.

Learn more about Tool Palette and other NEW AutoCAD 2015 features by registering for the 32-hour Fundamentals class. Click Here to request more information.

AutoCAD: Tool Palettes

Written by Cindra Drowne-Walsh

Customize by adding your own Blocks / Commands / Patterns:

The Tool Palette is a great way to organize (for quick access) commonly used items such as blocks / hatch patterns / Tables / even your most used commands can be placed into a Tab in the Tool Palette.

* IMPORTANT:

The Tool Palette is a visual means to access information. It creates a link to items and that link has to stay in tacked otherwise access to those items has been lost and they cannot be accessed through the Tool Palette. All will need to be re-associated.

File management must be thought through prior to creating the Tabs and placing items into the Tool Palette. If the pathing location of the Blocks placed into the Tool Palette is changed/modified the connection has been lost, you will not have access. All will need to be re-associated.

Blocks/Drawings cannot be deleted or moved from its original location once placed into a Tool Palette, if this happens there is no access to these files. Deleted files will need to be drawn again and then re-associated.

  1. Access the Tool Palette: View tab / Palettes Panel / Tool Palette button, (Image 1).or by typing in at the Command Line – TOOLPALETTES to open, TOOLPALETTESCLOSE to close:
  2. Tool Palette: (Image 2)
  3. Create a New Palette Tab: Right Click in the Title Bar area select New Palette. A tab with New Palette appears in line with the other tabs type in a Name. (Image 3).
Tool Palette 1

Image 1

Image 2: Tool Palette: To create a new Tab:  Right Click over the Title Bar of the Tool Palette select New Palette. Type in a name for the new Tab.

Image 2:
Tool Palette:
To create a new Tab:
Right Click over the Title Bar of the Tool Palette select New Palette. Type in a name for the new Tab.

Image 3: Creating a New Tab and defining the Name.

Image 3:
A. Creating a New Tab and defining the Name.

B.

B.

C.

C.

 

 

 

 

 

 

 

Items that can be added to a Tool Palette:

(Commands, Blocks, Hatch Patterns)

Ways to add Content to the Tool Palette

1. Pick * Hold * Drag * Drop: With the Drawing File open that contains the block(s) you want to add into a Palette with the Blocks inserted and visible on the screen. Select one block at a time (not on a grip) and drag it into the Palette. If it doesn’t respond SAVE the Drawing and try again.

The Block Image and Name will appear in the Palette. To use these images select and move the mouse into the drawing then place it into the draw area. (as the Insert Command) or Pick Hold and Drag the image into the drawing. You have more placement control with the first option.
2. Through the Design Center – Drag * Drop Drawings and Hatches into a Palette.
3. Through the Customized User Interface (CUI) Editor. Drag * Drop commands from the Command List pane.
4. Through the Customize dialog box Drag Toolbar Buttons into the Palette.
5. Lastly you can Copy and Paste from one Tool Palette to another.

Image 4

Image 4

Next Blog: How to Share your Tool Palettes with others.

Learn more about Command Line Features and other NEW AutoCAD 2015 features by registering for the 32-hour Fundamentals class. Click Here to request more information.

AutoCAD: Command Line features/display broken down Part 1

Written by: Cindra Drowne-Walsh

These features/options help the user to be more productive.

Part 1 of 2

Command Line 1-3 options

  1. How to move the Command Line when docked / un-docked (floating):

2.   How to turn ON or OFF the Command Line window:

Turn OFF:

  • Select the X on the left side of the Command Line window.
  • Type in COMMANDLINEHIDE then Enter this will close the Command Line window.

Turn ON:

  • Type in COMMANDLINE then Enter. (even though there is no Command line window it works.)

On or OFF Toggle options:

  • Ctrl+9 keys selected together
  • Command Line button: Located in the View tab – Palettes panel.

Button toggle
3. Bring up a larger view of the Command Line window.

a. Select the up arrow in the lower right corner (only available when un-Docked not n Docked) it displays a larger list of the Command history.
b. Keyboard options: (toggles both ON and OFF)
F2 key when Floating – a pop up from the Command line is displayed.

CTRL +F2 key when un-Docked – opens up the full Text Screen Window. When

F2 key when Docked – opens a larger view of the Command Line Window (Text Screen Window.)

c. Select the View Tab, Palettes Panel, Text Window Button.

*You can scroll back through previous input with all options.

Sequence of selection for the Text Screen in the video is:

1st. Arrow located in the lower right hand corner selected with the mouse–floating Command Line
2nd F2 key- floating Command Line
3rd CTRL + F2 key – floating Command Line
4th F2 key- Docked Command Line
5th Text Window Icon – floating or Docked Command Line

*Keep in mind typed in commands are not case sensitive.

**Part 2 of 2 will cover Recent Commands and the Customize options.

Learn more about Command Line Features and other NEW AutoCAD 2015 features by registering for the 32-hour Fundamentals class. Click Here to request more information.

AutoCAD: Cursor Badge(s)

Written by: Cindra Drowne-Walsh

New in 2015:

This enhancement displays at the cross hairs or pick box. The symbol changes per the active command. This feature is nothing more than a visual aid.

“Autodesk refers to this visual as contextual feedback.”

Examples on how the Badge symbols will display within some commands, not all commands offer a Badge display.

When accessing the following Utilities commands the display will be a ?.

Examples. Measure, Radius, Angle, Area, Volume and ID Point

Utilities 1

When accessing some of the Modify commands a Badge will display but a badge does not display for all of the Modify commands.

Examples. Move, Copy, Scale, Rotate

Modify Move 2 Modify Copy 3 Modify Scale 4rotate

 

 

 

When in a selection mode such as the Implied Window / Polygon, Crossing Window / Polygon and Lasso, the below Badge symbols display.

The X displays when in commands such as Erase, Trim and Extend. This represents the portion of the geometry that will be removed from the drawing.

Selections Implied 6          Selections Crossing 7Selections 8

 

 

 

 

Within the Rotate Command this is the Badge display. If the Clockwise feature is modified from the default setting the visual of the Badge flips.

Modify Rotate 10Modify Rotate 11

Rotate setting 12

Mtext 13There is also a Badge that displays when in the Multiline Text Command. (MText)

 

 

 

*If you prefer that the Cursor Badge feature does not display it can be turned off by changing the System Variable CURSORBADGE to the option of 1. This is a new System Variable available only if Service Pack 1 has been installed onto your system.

Learn more about Cursor Badge(s) and other NEW AutoCAD 2015 features by registering for the 32-hour Fundamentals class. Click Here to request more information.